Ceramic coated pistons have longer life span then general metal ones

Vehicular engine are of several types and they belong to an absolutely huge variety such as car, bikes, buses, heavy vehicles, etc. But the underlying design is always the same and is similar across the varieties of vehicles found. The basic fundamental of a vehicular internal combustion engine is that it consists of a cylinder which is called the bore and another piece of cylindrical metal that is inserted into the bore. This piece is called a piston and it is attached to the crank which makes the gears and then the wheels to roll. There are two valves in the engine and through one of them air and oil mixture enters and through the other the exhaust gases leave the engine. In an internal combustion engine, there is a spark plug which ignites the air and oil mixture which results in a small explosion which pushes the piston down and the crank pushes it up. This small explosion and the subsequent push mean the piston goes up and down the bore thousands of times and it goes to work every time you start the ignition on the vehicle. The piston works up the hardest and it faces the most devastating levels of wear and tear that a metal can face. With small explosions at the top to the friction with the insides of the bore, a piston is under high pressure and friction and is liable to wear out very, very soon.

In such a case, the use of ceramic piston coatings could be highly useful as these coatings decrease the levels of friction in the piston. Ceramic coatings have always been used for decreasing friction and with their use in vehicular engines; it could mean that engines would last much longer than they were initially thought to be.

Read More

Ceramic coatings are the new solutions to the problem of engine under-performance

The exhaust pipes of vehicles might seem a bit useless for a while but it has a solid contribution when it comes help your car in achieving its full power. The cleaning up or freeing up of the vehicles exhaust system can help you in getting out more power from the engine and with that you can extract the full power out of your vehicle and get peak performance out of it. The clearing of carbon build up or any other exhaust fumes build up could harm the extent of power of the engine. It must be understood that a general internal combustion engine is like a pump and it can perform at its peak if the exhaust gases are taken out immediately or quickly.

The exhaust amount and engine temperature are of importance when it comes to an internal combustion engine. If the vehicle is used daily then these two factors could come to the fore front. These two factors are the prime reasons behind the under-performance of an internal combustion engine and even though several solutions are there to end this yet there is one that has found great popularity. This innovative new solution is having a ceramic coated header as an exhaust system component. A ceramic coating on the engine or the exhaust system has double benefits- it significantly lowers the temperature in the engine compartment but also captures the heat in the metal tubes which increases the scavenging of exhaust gases and they are removed quickly. This means that the engine works at its peak and performance of the vehicle is enhanced. The use of ceramic exhaust coatings have been found to be hugely beneficial for all kinds of vehicles as it primarily increases the engine’s working capabilities thus increasing total vehicular performance.

Read More

A good finish and long lasting coating can be experienced at only CCPcoatings

“Custom Concepts Performance Coatings” avails best pricing on both batch and limited production industrial coating services to its customer such as, turbo coatings, chrome plating services, dry film lubricants, header coatings and many more. Such components get exposed to excess of heat and hence wear away too quickly as a result of which the life span of the object reduces. So to get a right alternative for the protection of such components is very important. Hence, coating them would be a great option for extra safety and for long lasting life of the specific work projects.

For different textures, characteristics, builds of the parts, suitable coatings for specific components should be used.

Our company offers different types of coatings including three basic coating categories; powder coating, ceramic coating and specialty coating.

-Our highly durable powder coatings guarantee you a long lasting protective layer for your components.  With 1000’s of colors and textures including metallic and candies, we are providing power coating services for batch and production volumes.

-Offering a full range of ceramic coatings, we are trying to avail our customers with specifically designed coatings that help in reducing friction, heat and eliminating damage caused due to corrosion or thermal shocks.

-Last but not the least, we also provide specialty coatings services. These are assorted dry films lubricants and heat shedding products. These Teflon coatings help in reducing friction, heat, wear on any rigid or semi rigid surface that are exposed to sliding, rotating or oscillating friction.

 You can be sure that you will have a good finish and long lasting coating experience with “CCPcoatings.com”. We now provide our powder coatings and ceramic coating services to international places as well. 

Read More

Experience diverse customer based industrial coating services with us

Coatings come in different types. They can be optical coatings, ceramic coatings or thermal spray coatings.

In thermal coatings process, metals, alloys, carbides or ceramics are first melted atomized and then used to spray on objects. These molten materials hit the object being coated. So the layer of material added to the component to change its surface properties is well known to be coating. With the varying coatings, the processes also differ from each other.

For instance another coating that is most popularly used is ceramic coating. Ceramic coatings are used to protect or insulate enhance components like exhaust manifolds, expansion chambers, pistons and headers that are exposed to high temperature situations for extended periods of time. This coating is specifically designed to increase the performance and horsepower, protect the component from heat radiation, increase corrosion resistance and reduce temperature.  They are usually made of nitrides, silicates, borides and carbides. Our company offers with a lot of ceramic coating applications like; Header Coatings, Exhaust Manifold Coating, Turbo Header Coatings, Turbo Housing Coatings, Piston Coatings, Cylinder Head Coatings, Exhaust Pipe Coatings, Expansion Chamber Coatings 

Being a renowned Industrial Coating Service Company, “Custom Concepts Performance Coatings” avails its customers with a full range of performance and appearance enhancing coatings at legitimate costs. We literally offer 1000’s of varieties of coating for any component that requires a rich, durable painted finish.

We have served with many component areas belonging to different industries like; Architectural, Automotive, Industrial, Motorcycle, Marine components and the list goes on. Today we have reached to the position where we are able to avail our services to countries worldwide.

Every customer is a valuable asset for us; hence forth we make sure that their component is done right and make their experience a satisfactory one with us. 

Read More

Enjoy your coated objects for many years with CCP Coatings

We all know that to lengthen the life span of any object, it needs certain kind of protection, like coating. Along with increasing its resistance to wear, corrosion and scratches, a coating can also enhance the physical appearance of an object.

There are many types of coatings such as; ceramic coatings, powder coatings, spray coatings and lots more. But the main thing to be considered is; every coating has its own set of characteristics and purposes. Hence it is very important to understand about coatings and act accordingly to coat your object.

The coating processes include a wide range of sub-processes that demand for different types of equipments, materials, machineries and most importantly high skills.  So it is advisable to select a company that is knowledgeable enough in this case so as to provide you with such results that you expect.  

“Custom Concepts Performance Coatings” is a full service Industrial Coating company (If you want more information CLICK) located in Detroit Michigan, that offers its customers with industrial coating services like powder coating, ceramic coating, thermal barrier coatings, ceramic exhaust coating, piston coatings and many more.

Whether it’s about ceramic engine coatings, thermal Barrier Coatings, header & exhaust Coatings or Piston Coatings, we make sure and understand well for what application is your object being used, and then coat it accordingly to avail you a perfect coated part that you can enjoy for many years hassle free.

By coating your object you can be beneficial in many ways; it enhances the object’s color and optical properties, enhances the object’s appearance and lifespan, make it water-resistant, increases the performance, increases the corrosion resistance, and lots more.

So, in order to protect your object from wear and tear actions choose “CCPcoatings.com” for coating your object and enjoy the benefits of your coated parts for several years. 

Read More